1. Home
  2. Research Papers

Research Papers

“Performance of Conical Hydrodynamic Journal Bearing under the worn-out condition.” – ilt-05-2022-0177.R1, The Journal of Industrial Lubrication and Tribology, Dinesh Haribhau Kamble, Vikas MPhalle and S.SMantha, Publisher: Emerald, Emerald insight 

“Performance Study of Conical Hydrodynamic Bearing Under Different Semi Cone Angle on Conical Hydrodynamic Bearing Performance With Air Lubrication, Proceedings of TRIBOINDIA-2018 An International Conference on Tribology, 15 Apr 2019, Working Paper Series, Dinesh Haribhau Kamble, Vikas MPhalle and S.SMantha,

“Performance Evaluation of Conical Hydrodynamic Journal Bearing (CHJB) Under Unworn and Worn Condition”, Dinesh Haribhau Kamble, Vikas M Phalle, Shankar S Mantha, Journal of Applied and Computational Mechanics.

“Modelling human resource dimension of international project risk management”, Dr-Rahul Vishwanath Dandage , SSMantha, Santosh BRane, Article – Jan 2021, Journal of Global Operations and Strategic Sourcing:

“Effect of Speed on Performance Analysis of Hole-Entry Hybrid Conical Journal Bearing for Different Semi Cone Angles”, PG Khakse, VM Phalle, SS Mantha, IWMSE2017, 3rd Annual International workshop on Material Science and Engineering, September 8 – 17, Guangzhou, Guangdong, China

“Productivity Enhancement in Investment Casting Foundry Using Automation Technique in Shelling Operation”, S Bansode, V Phalle, S S Mantha

“Influence of Slurry Composition on Mould Properties and Shrinkage of Investment Casting”, SN Bansode, VM Phalle, SS Mantha, Transactions of the Indian Institute of Metals, 1-11

“Optimization of process parameters to improve dimensional accuracy of investment casting using Taguchi approach”, SN Bansode, VM Phalle, SS Mantha, Advances in Mechanical Engineering 11 (4), 1687814019841460

“Design of a reconfigurable wheelchair with stand-sit-sleep capabilities for enhanced independence of long-term wheelchair users”, S Desai, S Mantha, V Phalle, Technology and Disability 30 (3), 135-151

“Design and Prototype Development of a Reconfigurable Wheelchair With Stand-Sit-Sleep Configurations”, S Desai, S Mantha, V Phalle, S Patil, V Handikherkar, ASME International Mechanical Engineering Congress and Exposition 52026 …

“TRIZ and AHP in Early Design Stage of a Novel, econfigurable Wheelchair”, S Desai, S Mantha, V Phalle, Journal of Mechanical Engineering (JMechE) 16 (3), 123-141

“Assistive Technology solution for disabled population of India”, S Desai, SS Mantha, VM Phalle, 2017 International Conference on Current Trends in Computer, Electrical Publisher IEEE

“Characterizing domestic electricity consumption in the Indian urban household sector”, J Singh, SS Mantha, VM Phalle, Energy and Buildings 170, 74-82

“Envelope Insulation for Energy Efficient Smart Buildings in India”, Jaya Goyal, S.SMantha, VMPhalle, The International Journal of Innovative Technology and Exploring Engineering, (IJITEE), ISSN: 2278-3075, Volume -8, Issue 11S, September 2019.

“Stability Analysis of Various Lengths Conical Hydrodynamic Bearing for Variable Load Conditions”, International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017), Ajay Kumar Gangrade, Vikas MPhalle and S.SMantha: 

“Effect of Aspect Ratio and Semi Cone Angle on the Stability Behaviour of a Conical Hydrodynamic Journal Bearing”, International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017), Ajay Kumar Gangrade, Vikas MPhalle and S.SMantha:

“Strategy development using TOWS matrix for international project risk management based on prioritization of risk categories”, International Journal of Managing Projects in Business, Rahul Dhandage, S S Mantha,

“Analysis of Technical and Economic Electricity Saving Potential in the Urban Indian Households has just been published in Sustainable Cities and Society”, Jaya Singh, S.SMantha, VMPhalle, The International Journal of Sustainable Cities and Society, an Elsevier publication: 

“Determining the degree of significance of barriers to effective risk management in international projects”, Rahul Dhandage, DrS S Mantha, DrV M Phalle, International Journal of Systems, Assurance Engineering and Management, Society for Reliability Engineering, Quality and Operations Management, Springer Publication: 

“Design, modeling and simulation of a reconfigurable wheelchair with stand-sit-sleep facilities”, Sumit Desai and DrS S Mantha, 5th International Conference on Mechanics and Mechatronics Research (ICMMR 2018), Tokyo, Japan during July 19-21, 20Published in IOP Conference Series: Materials Science and Engineering (Online ISSN: 1757-899X; Print ISSN: 1757-8981), and indexed by EI Compendex, Scopus, Thomson Reuters (WoS), Inspec, et al:

“Design and development of Small Capacity Mango process plant”, Nandu Durge and DrS S Mantha, 104th ICMA Annual Conference, September 23 – 26, 2018, Baltimore, Maryland: 

“Effect of Spoilers on Aerodynamics of a Car”, DrS S Mantha nd DrVivek Yakundi, International Journal of Scientific research and Review, A peer reviewed and refereed Journal: 
https://www.researchgate.net/publication/323906437_Effect_of_Spoilers_on_Aerodynamic_Properties_of_Car

“Optimized Design of Feeding System for Complex Steel (CF8) Investment Casting to Improve Quality and Productivity”, S Bansode, VM Phalle, SS Mantha, International Conference on Advances in Thermal Systems, Materials: 

“Effect of aspect ratio and semi cone angle on the stability behavior of a conical hydrodynamic Journal bearing”, DrS S Mantha and Ajay K Gangrade, SSRN e-Library, International Conference on Advances in Thermal Systems, Materials & Design Engineering (ATSMDE2017):

“Performance Analysis of a Conical Hydrodynamic Journal Bearing”, DrS S Mantha and Ajay Kumar Gangrade, Springer Journals, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering: pp 1–15,

“Small Capacity Plant for Post-harvest process of Mango – Worth to Indian Farmer”, Nandu Durge and DrS S Mantha, ICSCET 2018:

“Promoting quality of life of disabled people through comprehensive needs assessment study and QFD deployment targeted at evidence based wheelchair design”, Sumit Desai and DrS S Mantha, Springer Journals, Iranian Rehabilitation Journal;

“Parametric investigations for stability behaviors of hydro-dynamically lubricated conical journal bearing” Ajay Kumar Gangrade, Vikas MPhalle, and SSMantha, Journal of the Brazilian Society of Mechanical Sciences and Engineering;

“Ranking the Risk categories in International Projects using TOPSIS method” (IJMPB-06-2017-0070.R1), Rahul Dhandge and DrS S Mantha, International Journal of Managing Projects in Business: 

“Analysis of interactions among barriers in project risk management”, Rahul Dandage, Dr S S Mantha, Journal of Industrial Engineering International, pp 1-17, Springer Link 

“Future Prospects of Energy Efficient Smart Homes in India,”, Jaya Singh, S.SMantha, VMPhalle, IEEE International Conference on Nascent Technologies, 27-28 January 2017, Vashi

“Advances in Smart Wheelchair Technology”, Sumit Desai, S.SMantha, VMPhalle, IEEE International Conference on Nascent Technologies, 27-28 January 2017, VashiDOI: 10.1109/ICNTE.2017.7947914,

“Analysis of Payment Card Industry Data Security Standard [PCI DSS] Compliance by Confluence of COBIT 5 Framework”, Ashish Ukidve, Dr S S Mantha, IntJournal of Engineering Research and Application,

“Hatchback versus Sedan – A Review of Drag Issues”, Vivek Yakkundi, Dr S S Mantha, Vivek Sunnapwar, International Journal of Mechanical Engineering (SSRG – IJME), V4 (1),5-13 January 20ISSN: 2348 – 83

“Taguchi Approach for Optimization of Parameters that Reduce Dimensional Variation in Investment Casting”, SN Bansode, VM Phalle, S Mantha, Archives of Foundry Engineering, 5-12: 

“Orifice Compensated Performance Characteristics of Hybrid Hole-entry Conical Journal Bearing”, P Khakse, DrS S Mantha, DrV M Phalle, Journal of Engineering Tribology, SAGE Journals:

“Management of Information Security from Development Stage by applying COBIT Guidelines”, Ashish Ukidve, Ds S S Mantha, Milind Tadvalkar, Global Journal of Engineering Science and Research Management, and Thomson Reuters, 3(12): December, 2016] ISSN 2349-4506, http: // www.gjesrm.com, Global Journal of Engineering Science and Research Management:

“Comparative Frictional Analysis of Automobile Drum and Disc Brakes”, Hrishikesh Khairnar, DrSSMantha, DrVikas Phalle, Tribology in Industry, open and print access, peer reviewed International Journal, No1, Vol 38, March 2016,

“Internet of Things (IOT): Challenges and Concept”, Ashish Ukidve, Ds S S Mantha, International Conference on emerging Research trends in Applied Engineering and Technology, (ICERAT 2016), ISBN-978-93-5258-409-3

“Securing Web Applications from Code Injection Attacks by Implementing Provisions of Information Security Standards”, Ashish Ukidve, Ds S S Mantha, Milind Tadvalkar, International Journal of Advanced Research in Computer Science and Software Engineering, Volume 5, Issue 12, December 2015 ISSN: 2277 128X, Available online at:

“E-Governance in Technical Education – An Effective Tool in Developing Faculty Review System”, Ashish Ukidve, Ds S S Mantha, Milind Tadvalkar, International Journal of Emerging Research in Management &Technology ISSN: 2278-9359 (Volume-4, Issue-12), December 2015

“Comparative study of technics to improve efficiency of Association of Rule Mining, Meera Narvekar, DrS S Mantha, Proceedia Computer Science, 49(1):104-110 · December 2015, 

“Security Standards Perspective to strengthen Web Applications from Code Injection Attacks”, Ashish Ukidve, DrS S Mantha, International Journal for Advanced Research in Computer Science and Software Engineering (IJARCSSE), Volume 5, Issue 12 December 2015, 

“E-Governance in Technical Education – An effective Tool in developing Faculty review system”, Milind Tadwalkar, DrSSMantha,, International Journal of Emerging Research in Management and Technology, (IJERMT), Volume V, Issue 12, December 2015, Page 138,

“Comparative Study of Indexing Techniques for Data Dissemination in Wireless Environment”, Meera Narvekar, Selifa Lopes, DrSSMantha, Procedia Computer Science, Elsevier, Volume 45, 2015, Pages 671–680, International Conference on Advanced Computing Technologies and Applications (ICACTA),

Estimation of automotive brake drum−shoe interface friction coefficient under varying conditions of longitudinal forces using Simulink”, H P Khairnar, S S Mantha, open access at Springerlink.com, Friction, ISSN 2223-7690, DOI 10.1007/s40544-015-0082-6 CN 10-1237/TH, 

“Influence Of Semi Cone Angle On Performance Of a Non-recessed Hybrid Conical Journal Bearing”, DrV M Phalle, DrS S Mantha and P Khakse, ASME International Mechanical Engineering Congress and Exposition, Houston, Texas (IMECE), Paper NoIMECE 2015- 50877: 

“Comparative Performance of a Non-recess Hole-entry Hybrid/ Hydrostatic Conical Journal Bearing Compensated with Capillary and Orifice Restrictor”, DrV M Phalle, DrS S Mantha and P Khakse, Tribology International Elsevier Journal: 

“Performance Analysis of a Non-Recessed hybrid conical Journal bearing compensated with Capillary Restrictors”, DrV M Phalle, DrS S Mantha and P Khakse, ASME Journal, Journal of Tribology- TRIB-15-1073:

“An Integrated Model using Artificial Neural Network (ANN) and Kriging for Forecasting Air pollutants using Meteorological Data”, Suhasini Kottur, DrS S Mantha, International Journal of Advanced Research in Computer and Communication Engineering Vol4, Issue 1, January 2015, ISSN (Online): 2278-1021, ISSN (Print): 2319-5940, 

“The innovative Cloud based solution for classroom transformation”, DrS S Mantha, DrR Pudale, International performance and Conference on transformation in Engineering Education, 2015, Springer, P 607,

“Development of Framework for sustainable lean implementation: An ISM approach”, DrS S Mantha, MrJagdish Jadhav, Journal of Industrial Engineering International, An ISM approach, Journal of Industrial Engineering International, ISSN 2251-712X, Vol10, pp1-27, Springer Publications

“Analysis of Interactions among the Barriers to JIT Production: Interpretive Structural Modelling Approach”, DrS S Mantha, MrJagdish Jadhav, Journal of Industrial Engineering International, September 2015, Volume 11, Issue 3, pp 331-352,Publisher: Springer: 

“Comparison of Performance of analysis of non-recess hydrostatic/ hybrid conical journal bearing for various semi cone angles”, PGKhakse, S.SMantha, VMPhalle, International Conference in 2015 STLE, Dallas, Texas, USA, May 17 to 21,2015: 

“Performance behavior of Non-recessed Conical Journal Bearing”, PGKhakse, S.SMantha, VMPhalle, National Conference on Advances in Mechanical Engineering Techniques (AMET- 2015), Pune, March 12-13,2015: 

“Performance Analysis of a Non-recessed Hybrid Conical Journal Bearing Compensated with Capillary Restrictors”, PGKhakse, S.SMantha, VMPhalle, ASME Journal of Tribology, doi: 10.1115/1.4030808June 2015: 

“Performance Analysis of a Conical Fluid Film Hydrodynamic Journal Bearing”, Ajay Kumar Gangrade, DrSSMantha, Vikas MPhalle, Poster No – ME-03ID No– 129020103, Ph D – Colloquium _ March 17 & 18, 2015, VJTI, Mumbai:

“Influence of semi cone angle on the performance of a Conical Hydrodynamic Journal Bearing”, Ajay Kumar Gangrade, Vikas MPhalle, S.SMantha, 2015 STLE Annual Meeting & Exhibition, May 17-21, 2015 Omni Hotel Dallas, Texas, USA, ID-2125042: 

“Optimised Feeding System for investment casting To Reduce Dimensional Variation”, MrsSangita Bansode, DrSSMantha, Proceedings of 63rd Indian foundry Congress, (The Institute Of Indian Foundry men), 27th Feb – 1st March 2015 Indian Expo center Greater Noida Delhi: 

2Artificial Neural networks (ANN) model for forecasting air pollutants using meteorological data”, Suhasini K V and DrS S Mantha, Industrial Engineering Journal 2015: 

“Cloud application for managing retail Gas station, introduction to formation of National Oil energy Grid”, Arvind Anklikar, DrS S Mantha, International Journal of Science and Research, ISSN: 2319-7064, Volume 3, Issue 11, November 2014,

“Performance Analysis of Conical Fluid Film Hydrodynamic Journal Bearing for Various Aspect Ratio”, Vikas MPhalle, Ajay Kumar Gangrade, S.SMantha, National Tribology Conference – 2014” (NTC-2014), December 15-17, 2014, PES University, Bengaluru, Under the Aegis of Tribology Society of India (TSI): 

Exploring barriers for successful implementation of lean systems: A literature survey”, DrS S Mantha and Jagadish Jadhav, International Journal of Lean Six Sigma 05/2014; 5(2)DOI: 10.1108/IJLSS,-12-2012-0014, 

“Influence Of Feeding System On The Distortion Of Investment Casting”, MrsSangita Bansode, DrSSMantha, Procof 62nd IFC, Gandhinagar, Gujarat, India 7-9 February, 2014.

“Framework for reducing impediments in agile projects”, Radha Shankarmani, DrS.SMantha,, International Journal of Computer Applications, published in IJCA September 2014 Edition, Digital Library URL :

‘Roadmap for Lean implementation in Indian automotive component manufacturing industry: comparative study of UNIDO Model and ISM Model”, DrS S Mantha, MrJagdish Jadhav, Journal of Industrial Engineering International, 2014, 10:74, DOI 10.1007/s40092-014-0074-6, Publisher: Springer: 

“Automated spares and Inventory Management System for upstream and gas producing facilities using RFID based item tracking integrated with enterprise resource planning through centralized onshore sourcing hub for improving uptime reliability”, Arvind Anklikar, DrS S Mantha, International Journal of Information, knowledge and research in Mechanical Engineering, ISSN 0975 – 668X| NOV 13 TO OCT 14 | VOLUME – 03, ISSUE – 01 Page 570 – 575, 

“Framework for improving fuel efficiency in Indian transport sector using contemporary technology and impact of the same on Indian exchequer”, Arvind Anklikar, DrS S Mantha, International Journal of Information, knowledge and research in Mechanical Engineering, ISSN 0975 – 668X| NOV 13 TO OCT 14 | VOLUME – 03, ISSUE – 01 Page 576 – 584,

“Exploring risks in international projects”, DrS S Mantha, Rahul Dandage, National Conference on Industrial Engineering and Technology Management, NCIETM, at NITIE, Mumbai, Oct 29th – 31st 2014:

”Investigation and estimation of Geometric Differences between the Left and Right distal Femur via 3D solid models Developed from CT Scans Using CAD tools”, Jayesh J Dange, DrSSMantha, International Journal of Mechanical Engineering and Computer Applications, (ISSN2320-6349), IJMCA Volume 02, Issue 01, Feb 2014:

“Refinery to retail supply chain tracking and energy balance using Big Data Application and development of monitoring framework using contemporary techniques”, Arvind Anklikar, DrS S Mantha, International Journal of Engineering Research & Technology (IJERT) Vol3 Issue 1, January – 2014 IJERT ISSN: 2278-0181, 

“Supply Chain Management of Downstream Retail Oil and Gas products – Imperatives for Next Generation e-Gas Station”, Arvind Anklikar, DrS S Mantha, International Journal of emerging Technologies and applications in Engineering, Technology and Sciences, ISSN: 0974-3588 | JAN ’14 – JUNE ’14 | Volume7: Issue 1 Page 1 – 8, 

“Supply risks in JIT implementation”, DrS S Mantha, MrJagdish Jadhav, International Journal of Business Performance and Supply Chain Modelling – Inderscience Publishers LtdIJBPSCM_45894, 

“Exploring the barriers for successful implementation of JIT: A manufacturer’s perspective”, Jagdish Jadhav, DrS S ManthaIntJof Procurement Management, 2014 Vol.7, No.3, pp.316–342,

“Analysis of Interactions among the Barriers to JIT Production: Interpretive Structural Modelling Approach” ID number (TPRS-2013-IJPR-1563) DrS S Mantha, MrJagdish Jadhav, The International Journal of Production Research, / Published online: 10 December 2014 The Author(s) 20Publisher: Springer: 

“JIT Distribution, A perspective to overcome the barriers”, J RJadhav, DrS.SMantha, National Journal IIIE, 2014

“The innovative Cloud based solutions for classroom transformation”, Ramesh Pudale, DrS S Mantha, International conference in transformations in Engineering education, ICTIEE January 16th – 18th 2014, Proceedings of the International Conference on Transformations in Engineering Education, 2015, p 607, Date: 12 Sep 2014: 

“Influence of temperature and semi cone angle on the performance of conical hydrodynamic journal bearing”, Gangrade AK, Phalle Vikas, DrSSMantha, 12th EDF / Prime Workshop: France, Futuroscope, September 17 & 18, 2013, “Solutions for performance improvement and friction reduction of journal and thrust bearings”: 

“Interpretive structural Modelling for implementation of integrated Green Lean System”, JRJadhav, DrS.SMantha,, IJCA Proceedings on International conference on Green Computing and Technology, © 2013 by IJCA , Journal, ICGCT – Number 2, Year of Publication: 2013, 

“Practice Bundles for integrated Green Lean Manufacturing System”, JRJadhav, DrS.SMantha, International Journal of Computer ApplicationsIJCA Proceedings on International conference on Green Computing and Technology, © 2013 by IJCA Journal, ICGCT – Number 2, Year of Publication: 2013, 

“Interpretive structural Modelling for implementation of integrated Green Lean System”, JRJadhav, DrS.SMantha, International Journal of Computer Applications, ICGCT proceedings with IJCA on October 14, 2013, Digital Library URL:

“Barriers for Successful Implementation of JIT: A Manufacturer Perspective”, JRJadhav, DrSSMantha, International Journal of Procurement Management, IJPM (April 2013),Vol7, No3, pp.316–342, 

“AHP Driven GIS Based Emergency Routing in Disaster Management”, Varsha Mali, Madhuri Rao, DrSSMantha, Advances in Computing, Communication, and Control pp 237-248, International Conference, Springer Link: 

“Optimization of Data Allocation for Mobile Value Added Services”, DrS S Mantha and Meera Narvekar, Advances in Computing, Communication, and Control, Communications in Computer and Information Science Volume, Springer Verilag Heidelberg 2013 361, pp 284-300, 

“Fuzzy Logic based Decision Support System for Mass Customization”, DrS S Mantha and N Gilke, International Journal of Computer Applications (IJCA) January 2013 Edition,

“Exploring barriers in Lean Implementation”, JRJadhav, DrSSMantha, Emerald Publication, International Journal of Lean Sigma (IJLSS), Vol 5, No 2, 

“Infrastructural Backbone of Enabling and Converging Technologies for Mass Customization Manufacturing System in Automotive Industries”, DrS S Mantha, Gilke N R, G T Thampi (2012), International Journal of Quality Research , Volume 7, No1-2013, pp-149-157,

“Agile Methodology Adoption: Benefits and Constraints”, Radha Shankarmani, DrS.SMantha,, Digital Library URL: 

“Inclusion of e-Assist to increase agile adoption”, Radha Shankarmani, DrS.SMantha, International Journal of Scientific and Research Publications, IJSRP, Volume 2, Issue 11, November 2012 Edition [ISSN 2250-3153], 

“Personalized predictive Model for Mobile Value-Added Services” pg 316, ICACII 2012, Meera Narvekar, DrS S Mantha held in Taiwan, February 2012: 

“Enhanced Dynamic Routing in Disaster Management based on GIS”, DrSSMantha, MsMadhuri Rao, International Conference on Intuitive Systems & Solutions (ICISS) 2012 Proceedings published by International Journal of Computer Applications® (IJCA),

“A Review of Advanced Fibre Reinforced Composite”, S S Joglekar, S P Borkar, S S Mantha, Journal of Man-Made Textiles in India EBSCO, Vol 40 Issue (3), Issue 3, p099-6p., 2012:

“Personalization of Mobile value-added Services”, Meera Narvekar, DrS S ManthaInternational Conference CUBE 2012 Proceedings of the CUBE International Information Technology Conference, Page 707 – 711, ACM international conference proceedings ISBN 978 – 1 – 4503 – 1185 – 4,

“Clustering Objects for spatial Data Mining: A review”, Suhasini K V and DrS S Mantha, Journal of advances in Engineering Sciences, January – June 2012, pp 63-72

“Design of Framework for Semantic Annotation of Geospatial Data”, DrSSMantha, MsMadhuri Rao, International Journal of Information and Electronics Engineering, Vol2, No3, May 2012, 

“GIS driven Urban Traffic Analysis based on Ontology”, DrS S Mantha, Madhuri Rao, T Malgunkar, International Journal of Managing Information Technology (IJMIT) Vol.4, No.1, February 2012, 

“Implementation of Framework for Semantic Annotation of Geospatial Data”, DrS S Mantha, Madhuri Rao, Advances in Computer Science, Eng& Appl., AISC 166, pp379–3springerlink.com © Springer-Verlag Berlin Heidelberg 2012:

“Design of Framework for Semantic Annotation of Geospatial Data”, DrS S Mantha, Madhuri Rao, International Journal of Information and Electronics Engineering, Vol2, No3, May 2012, 

“New Association Rule for Mining Based on Frequent Item Set”, SSMantha, Madhuri Rao, Academy and Industry research collaboration centre (AIRCC), First International Conference on Artificial Intelligence, Soft Computing and Applications (AIAA-2011), September 23~25, 2011, Tirunelveli, India, Proceedings Volume Editors: David Bracewell and Edgardo Palza
ISBN : 978-1-921987-01-4,

“Constraint generation tool for white box testing”, Dr SSMantha, Madhuri Rao, 2011, International Conference on Software and Computer Applications (ICSCA 2011), Volume 4 Issue 5, May 2015 

“Design and implementation of ontology based on semantic analysis for GIS Application”, Dr SSMantha, Madhuri Rao, AIAA, September 23rd – 25th 2011, International conference on Artificial Intelligence, soft computing and applications 

“Inclusion of e-Assist to increase Agile Adoption”, Radha Shankarmani, DrSSMantha, DrVinaya Babu, International Journal of Scientific and Research Publications, Volume 2, Issue 11, November 2012:

“Preparedness & Challenges to implement Mass Customization Concept by Indian Automobile Industry”, NRGilke, S S Mantha, GTThampi, International Conference on Sustainable Manufacturing Issues, Trends and Practices, (ICSM-2011), BITS Pilani: 

“Performance assessment of ASD team using FPL football rules as reference”, Radha Shankaramani, DrS S Mantha, India Conference (INDICON), 2011 Annual IEEE, 16-18 Dec2011, Page(s): 1 – 4, Print ISBN: 978-1-4577-1110-7, INSPEC Accession Number: 12506706, Conference Location: Hyderabad, Publisher: IEEE: 

“Annotation of Geospatial Data Based on Semantics for Agriculture: Case Study for India”, DrS S Mantha and Madhuri Rao, Computer Research and Development (ICCRD), 2011 3rd International Conference on, 11-13 March 2011, (Volume:1), Page(s):, 139 – 142, Print ISBN: 978-1-61284-839-6, INSPEC Accession Number: 11975574, Shanghai, DOI: 10.1109/ICCRD.2011.5763990, Publisher: IEEE, 

“Publish Subscribe System Based On Ontology and XML Filtering”, DrS S Mantha, Madhuri Rao, 2011,Computer Research and Development (ICCRD), 2011 3rd International Conference on (Volume:1 ), 11-13 March 2011, Page(s): 154 – 158, Print ISBN: 978-1-61284-839-6, INSPEC Accession Number: 11975577, Shanghai, DOI: 10.1109/ICCRD.2011.5763993, Publisher: IEEE: 

“Query Optimisation for Mobile Commerce”, DrS S Mantha, Deepika Chhada, 2011 International Conference on Information and Computer Applications ICICA, 2011, Dubai, UAEMarch 18-20, 2011

“Encryption Decryption algorithm for M-Commerce”, D Ganotra, DrS S Mantha, ICWET ’11 Proceedings of the International Conference & Workshop on Emerging Trends in Technology Pages 218-219, ACM New York, NY, USA ©2011, ISBN: 978-1-4503-0449-8,

“A New Association Rule Mining Based on Frequent Item Set”, Sanober Shaikh, Madhuri Rao and SSMantha, First International Conference on Artificial Intelligence, Soft Computing and Applications (AIAA-2011), September 23~25, 2011, Tirunelveli, India, ISBN : 978-1-921987-01-4, 

Introduction of Mass Customization in India :A Review SS Gilke, N.R.and Mantha Industrial Engineering Journal 2 (14), 35-38“Creation of Indian classical music Ontology and information retrieval using, query expansion”, Dr SSMantha, Madhuri Rao, International Conference on Informatics, Cybernetics, and Computer Applications (ICICCA2010)

“Mining Maximal Frequent Item Sets”, DrS S Mantha, Madhuri Rao, International Journal of Computer Applications (0975 – 8887), Volume 10 – No.3, November 2010, Number 3 (ISBN: 978-93-80747-94-5), 

“Agile + Agent based mentoring: Formula to improve the odds of success”, Radha Shankarmani, DrSSMantha, ICSOFT, 2010, 5th International Conference on Software and Data Technologies, Athens, Greece, 22nd – 24th July 2010

“Specification of a Framework for Geospatial Data Using Ontological Observation for Agricultural Information”, Madhuri Rao, DrS S Mantha, 2010, North American Congress of Clinical Toxicology, Denver, CO, October 7th – 12th 2010

“A Decision Support System Utilizing a Semantic Agent”, Radha Shankaramani, DrS S Mantha, Software Engineering and Service Sciences (ICSESS), 2010 IEEE International Conference on16-18 July 2010, Page(s): 442 – 447, Print ISBN: 978-1-4244-6054-0, INSPEC Accession Number: 11487565, Beijing, DOI: 10.1109/ICSESS.2010.5552340, Publisher: IEEE, 

“Spatial data mining application to traffic analysis”, Suhasini K V and DrS S Mantha, International Conference on Computer applications, Dec 24 – 27 2010, Pondicherry, India
Numerical Simulation of Flowfield around a Car & Aerodynamic Analysis by Fine Tuning Wind Tunnel Pressure Distribution with CFD Results, Vivek Yakkundi, SS Mantha, 2010/7/1, CURIE Journal

“Semantic agents as E-Mentors for agile projects”, Radha Shankaramani, DrS S Mantha, SIGAI Workshop on emerging research trends in Artificial Intelligence – 2010, supported by CSI, India, April 17th 2010: 

“Spatial Decision support system for weather forecasting”, Suhasini K V and DrS S Mantha, National Conference on Advanced pattern mining and multimedia computing – APMMC 2010, 25 – 26 February 2010

“Semantic Mining techniques for fuzzy search in large text databases”, Madhuri Rao, DrS S Mantha, SIGAI Workshop on emerging research trends in Artificial Intelligence – 2010, supported by CSI, India, April 17th 2010

“Remote centre compliant gripper for precision robotic assembly”, ID 801, DrS S Mantha, Ramesh Pudale, The 2nd International Conference on Computer and Automation Engineering, “ICCAE 2010”, Singapore, February 26 – 28, 2010, IEEE catalog NoCFP 1096F-PRT

“Variation in the Predicted drag of a car due to differing turbulence closure Schemes”, Vivek Yakkundi, DrS SMantha, International Journal of Advanced Engineering Applications, Vol.3, Iss.6, pp.67-78, 2010, 

“Prediction of aerodynamic drag of a car with image based Modelling and CFD simulation”, Vivek Yakkundi, DrS SMantha, International Journal of Advanced Engineering Applications, Vol.3, Iss.6, pp.45-57, 2010, 

“Retail landscape in India”, DrB E Narkhede and DrS S Mantha, Welingkar Research Journal, March 2010

“Sun hemp fiber reinforced waste polyethylene bags composites”, DrS P Borkar, DrSSMantha, Journal of Reinforced Plastics and Composites, SAGE Journal, Published in association with the American Society for Composites, Volume 29 Issue 15, August 2010, 

“Reverse Logistics – A critical review and need to explore its potential in retail sector”, BENarkhede and SSMantha, University News, 2009, Association of Indian Universities, New Delhi

“Benefits of supplier involvement in new product development: A holistic perspective”, DrS S Mantha, DrS B Rane, 7th AIMS International conference on Management, IIM Bangalore, December 20th – 23rd 2009

“Domain Ontologies for Information retrieval”, Maduri Rao and DrS S Mantha, International joint conferences on Computer, Information, and Systems Sciences and Engineering, (CISSE 2009), IEEE and University of Bridgeport, December 4th – 12th 2009

“Eco-friendly banana fibre reinforced polypropylene composites”, DrS P Borkar, DrS S Mantha, The Indian Journal of Fiber and Textile Research, national Institute of science Communication and Information resources, 2009 (NISCAIR)

“Application of lean manufacturing principles in precious metal alloys machine cast jewelry manufacturing”, BENarkhede and SSMantha – Udyog – Pragati, the Journal of the Practicing Manager, published by NITIE quarterly (April – June 2009)

“Adaptable Architecture for Mobile learning”, Meera Narvekar and DrS S Mantha, July 22nd to July 25th 2009, Proceedings of the 6th WSEAS International Conference on Engineering Education: Pages: 64 to 68, 

“A Survey on Expert Systems in Legal frame work”, DrS S Mantha and Pooja Roundale, Third PIMR International Conference on Transcending horizons through innovative global practices at Prestige Institute of Management and Research, Indore, February 7th – 8th 2009

“Prediction of aerodynamic drag of a car with image-based Modelling and CFD simulation” DrS S Mantha and Vivek Yakundi, International Journal of Advanced Engineering Applications, 2010:

“SSRG International Journal of Mechanical Engineering (SSRG – IJME) – Volume 4 Issue 1 – January 2017 ISSN: 2348 – 8360 www.internationaljournalssrg.org Page 5 Hatchback Versus Sedan – A Review of Drag Issues Vivek Yakkundi , Shankar Mantha , Vivek Sunnapwar, 

“Computational Analysis of “Drag & Lift” of a car With K-ε std, and K-ω SST (Shear Stress Transport) Turbulence Models & Effect of Mesh RefinementSource: CURIE Journal Oct2010, Vol3 Issue 3/4, p117-113p1 Color Photograph, 7 Diagrams, 1 Chart, Author(s): Yakkundi, Vivek K.; Mantha, SS

“Aerodynamics of Car- An Overview”, Vivek Yakundi, DrS S Mantha, Journal of Cooperation among University, Research and Industrial Enterprises (CURIE), Quarterly published by BITS, Pilani (ISSN No :0974-1305), 2009, Indexed by EBSCO-USA, CABELL’S Directory of Published Opportunities in Management-USA, NISCAIR-New Delhi

“CFD for Robust Aerodynamic Design of Cars”, Vivek Yakundi, DrS S Mantha, Journal of Cooperation among University, Research and Industrial Enterprises (CURIE), Quarterly published by BITS, Pilani, (ISSN No0974-1305), 2009, Indexed by EBSCO-USA, CABELL’S Directory of Published Opportunities in Management-USA, NISCAIR – New Delhi

“Composites from some Natural Fibres of India” SP Borkar, DrS S Mantha, Surya Nath Choudhari, Journal of Manmade Textiles in India, Vol52, Issue 7, July 2009, pp.233-239

“Analysis of BTA machined components using Artificial Neural Network” DrS S Mantha, K H Jatakar”, 2nd International Conference on Recent Advances in material processing and Technology (RAMPT-09), National Engineering College, K R College, Tamilnadu, February 25th 27th 2009

“Impact of cooperative research on Organizational Performances, Case study in jewelry Industries”, BENarkhede and SSMantha – Journal of Cooperation among University, Research and Industrial Enterprises (CURIE), Quarterly published by BITS, Pilani, (ISSN No:0974-1305), 2009, Indexed by EBSCO-USA, CABELL’S Directory of Published Opportunities in Management-USA, NISCAIR-New Delhi

“Application of Lean Manufacturing Principles In Precious Metal Alloys Machine Cast jewelry Manufacturing”, BENarkhede and SSMantha – Udyog – Pragati, the Journal of the Practicing Manager, published by NITIE quarterly, Vol 33, No 2, April-June 2009

“An Empirical Investigation of The Impact of Concurrent Engineering Practices for Integrated Product Development on Competitive Capabilities: A Case Study”, DrBENarkhede, DrSSMantha – ICFAI Journal of Operations Management, 2009

“Maximum utilization of human resource – a Review”, Sanjay Kumar, DrS S Mantha, The Journal of Indian Institution of Industrial EngineeringVolume I and issue No.7, January 2009

“Scrap reduction by using total quality management tools”, Sanjay Kumar and DrS S Mantha, International Journal of Industrial Engineering – Theory, Applications, and Practice ISSN # 1072-4761, Vol 16, No 4, 2009

“Supply Chain in large- and Small-Scale Industries: A Comparative Study”, DrS S Mantha, S Ram Reddy, International Journal of EnggResearch & InduAppls(IJERIA)ISSN 0974-1518, Vol.1, NoV (2008),pp 215-232, 

“Benefits of supplier involvement in new product development – A holistic perspective”, DrS S Mantha and S B Rane, International Journal of Engineering and Applications 

“Effect of Product Design Criterion on Supply Chain Dimensions – A Case Study”, SBRane, DrS S Mantha, 12th Annual Conference of Society of Operations Management, Indian Institute of Technology, Kanpur, December 19-21, 2008

“Application of Lean Six Sigma: a case study”, SBRane, DrS S Mantha, 12th Annual Conference of Society of Operations Management, Indian Institute of Technology, Kanpur, December 19-21, 2008

“CFD analysis of flow over car variants & validation with Ahmed Body”, Vivek Yakundi, DrS S Mantha, Journal of Cooperation among University, Research and Industrial Enterprises (CURIE), Quarterly published by BITS, Pilani, III Issue, October 2008, (ISSN No: (0974-1305), Indexed by EBSCO-USA, CABELL’S Directory of Published Opportunities in Management-USA, NISCAIR-New Delhi

“Predicting BTA drill wear using an Artificial Neural Network” DrS S Mantha, K H Jatakar, International Conference on recent trends in Materials and Mechanical Engineering (ICMME 2008), DrMahalingam College of Engineering and Technology, Tamil Nadu, December 18th – 20th 2008

“Bridging the Urban Rural Divide through value added services”, DrS S Mantha, All India seminar on Mapping Excellence towards Global Competitiveness (MAP EXCEL’ 2008), IIE Maharashtra, 16th 17th October 2008

“Numerical simulation of flow-field around a car & aerodynamic analysis by fine tuning wind tunnel pressure distribution with CFD results”, Vivek Yakundi, DrS S Mantha, Journal of Cooperation among University, Research and Industrial Enterprises (CURIE), Quarterly published by BITS, Pilani, III Issue, October 2008, (ISSN No :0974-1305), Indexed by EBSCO-USA, CABELL’S Directory of Published Opportunities in Management-USA, NISCAIR-New Delhi

“An Empirical Investigation of the Impact of Industry-Institute-Interaction on Performance of the Organization: A Case Study”, DrS S Mantha, DrB E Narkhede, – Journal of Cooperation among University, Research and Industrial Enterprises (CURIE), Quarterly published by BITS, Pilani, III Issue, October 2008, J Coop Univ Res Ind Enterpr 2008, 1(3), 18-25

“Developing frame work for designing supply chain strategies for global competitiveness”, DrS S Mantha, Madhukar Nagare, IMR Conference on Global Supply Chain Management: Role of emerging economies, 2008, Indian Institute of Management Bangalore, Dec22-24, 2008

“Quality in jewelry Manufacturing: A Critical Review and Future Directions from Industrial Engineering angle”, BENarkhede, DrSSMantha, Industrial Engineering Journal VolI Issue No.2, August 2008, pp30-36

“Surface roughness and hole size in BTA drilling using an Artificial Neural Network” Keshav Jatakar, DrS S Mantha, The Journal of Institution of Industrial Engineering(AR/NO/1553/08)

“Accuracy aspects of BTA machined stress proof steel components” Keshav Jatakar, DrS S Mantha, The Journal of Institution of Industrial Engineering(AR/NO/1552/08)

“A review of research in BTA machining”, Keshav Jatakar, DrS S Mantha, The Journal of Institution of Industrial EngineeringRefNo.AR/NO/1516/08

“Anthropomorphic Robotic Finger Modeled with Mechanical Linkages”, R.SPudale and S.SMantha, IIScCentenary – International Conference on Advances in Mechanical Engineering (IC-ICAME), Bangalore, India, July 2-4, 2008

“Aerodynamic analysis of a car and evaluation with an inverse air plane wing using CFD simulation.”, Vivek Yakkundi, DrS S.Mantha, National Conference on Recent trends in Mechanical Engineering Sciences, RTIMES-2008, February 21st and 22nd 2008

“An empirical investigation of the impact of IT enabled supply chain on performance of the organization: A case study”, DrS S Mantha, B E Narkhede, International Conference on Issues and Challenges in Supply Chain Management (ICSCM – 2008), being organized by Department of Mechanical Engineering, ITBHU, Varanasi, during 28-30th March, 2008

“Robot Wrist Design and FEA of Gear Mechanism”, A151, DrS S Mantha, Ramesh Pudale, 3rd International Conference on Services Management, IIT Madras, May 9-10,2008

“Supply chain Techniques in jewelry Design”, DrS S Mantha and B E Narkhede, (NoEB-123-007), International Conference on Issues and Challenges in supply Chain Management, March 28-30, 2008

“Development of Spherical Robotic Wrist Using I-Deas Software for Master-Slave Manipulators”, Ramesh Pudale, DrS S Mantha, The International Conference on Emerging Technologies and Applications in Engineering, Technology, Sciences, Rajkot (Gujarat), India, January 13-14, 2008

“Development of Gripper for Geometrically variant Work-pieces”, Ramesh Pudale, S.SMantha, Third International Conference on Services Management held at University Park, PA (USA), May 9th -10th, 2008

“Damage detection in composites”, SPBorkar and DrS S Mantha, International Journal of Textile Asia, June 2007

“Development of Suction Gripper for geometrically variant work-pieces using CAD”, RSPudale, DrSSMantha, 49th IIIE Convention and National Seminar organised at Trivandrum during 12th – 13th October 2007,

“A Web – based manufacturing monitoring System based on CAD/CAM Integration” (p.29), Ramesh Pudale, S.SMantha, B Ravi, and DrVVenkat Raj, International Conference on Manufacturing Automation, National University of Singapore, ICMA-07, May 28th – 30th 2007

“Socio – Economic development of India through Science & Technology Entrepreneur’s Park”, DrS S Mantha, B E Narkhede, 31st National Science Congress, SNDT, December 27th to 31st December 2007

“India responding to the challenge of the Indian digital society”, DrS S Mantha, DrG T Thampi, 31st National Science Congress, SNDT, December 27th to 31st December 2007

“Technology Practitioners Perspective of Nation Building by Accentuating Technology Education and Training”, V B Shinde, DrS S Mantha, DRG T Thampi, 31st National Science Congress, SNDT, December 27th to 31st December 2007

“Development of Spherical Robotic wrist” using I-DEAS software for Master-Slave manipulators”, Ramesh Pudale, DrS S Mantha, XI Annual International Conference of Society of Operations Management (SIOM – 2008), Symbiosis Institute of Operations Management 21st -23rd December 2007

“MEWMA Control charts for Complex Processes”, K N Vijay Kumar, Dr S S Mantha, International conference on Advanced Manufacturing (ICAM – 07), MIT, Manipal, 24th,25th, 26th, October 2007

“MCUSUM Control Charts for improving Quality (QE-002)”, K N Vijay Kumar, Dr S S Mantha, International conference on Advanced Manufacturing Technologies at CMERI, Durgapur, organized by Central Mechanical Engineering Research Institute, Durgapur, West Bengal, 29th and 30thNovember 2007

“Development of Gripper for Geometrically Variant Work-pieces”, DrS S Mantha, Ramesh Pudale, International Conference on “Recent Trends in Mechanical Engineering (ICRTME – 2007), Ujjain Engineering College, Ujjain, October 4 to 6, 2007

“Technology as the driving force of global industrial competition: A critical review and case study”, DrS S Mantha and B E Narkhede, The Journal of Institution of Industrial EngineeringRefNoAR/NO/1430/07

“Multivariate capability indices for quality improvement – A review”, K N Vijay Kumar, Dr S S Mantha, National conference on trends in Advanced Manufacturing NCAM 2007, FrCRCE, Bandra, 19th and 20th October 2007

“MEWMA Control charts for Complex processes”, K N Vijay Kumar, Dr S S Mantha, International Conference on Advances in Manufacturing Engineering at Manipal Institute of Technology, Karnataka, 25th and 26th October 2007

“Measurement system analysis with attribute data”, K N Vijay Kumar, Dr S S Mantha, 9thInternational Symposium on Measurement and quality control, IIT, Madras in association with International Measurement Confederation – 21st to 24th November 2007

“Quality improvement using Multivariate Statistical Process Control”, K N Vijay Kumar, Dr S S Mantha, International Conference on “Quality Management Practices”, ITM, Mumbai, 16th and 17th August 2007

“Quality improvement using Statistical process control – A case study”, K N Vijay Kumar, Dr S S Mantha, The Industrial EngineeringJournal “NoIIIE / IEJ – 1417 / NHQ2007

“Quality aspects in manufacturing a deodorizer – A case study”, K N Vijay Kumar, DrS S Mantha, The Industrial Engineering Journal, VolXXXVI No09, September 2007

“Rejection analysis based on First Pass Yield – A Case study”, DrS S Mantha, Gautam Divekar, K N Vijay Kumar, Industrial Engineering Journal, VOLXXXVI No11, November 2007 p31

“Effect of silica and Calcium Carbonate fillers on properties of woven glass fibre composites, SP Borkar, DrS S Mantha, Indian Journal of fibre and Textile Research, Vol32, June 2007, pp254-263

“Manufacturing jute Composites – Possibilities and hurdles”, SP Borkar, DrS S Mantha, Journal of Textile Trends, published in June 2007 issue “Bio Composites – A review”, SP Borkar, DrS S Mantha, Asian Textile Journal, May 2007, P81-86

“IPR – an Indian Perspective”, DrS S Mantha, National seminar on Intellectual Property rights regime: challenges and prospects, 16th to17thMarch 2007, University of Mumbai.

“Recycling of Plastics for composite manufacturing – A review”, SP Borkar, DrS S Mantha, The Journal of manmade Textiles in India, January 2007, Vol 50, Issue 1, p 19-22

“Quality improvement in Manufacturing – A data Mining approach”, K N Vijay Kumar and DrS S Mantha, 2nd National Conference on Management Science and Practices (NCMSP), conducted by ORSI, Ahmedabad Chapter and IIM Ahmedabad at IIT Madras, March 9th to 11th 2007

“Optimisation of Material – A Review”, Sanjay Kumar, DrS S Mantha, The Journal of the Indian Institution of Industrial EngineeringRefVolXXXVI NO08 August 2007

“Damage detection in Composites”, DrS S Mantha, S PBorkar, The Asian Textile Journal, published in the April 2007 Issue

“Factors affecting total productivity and quality management: a primary study of precious metal alloys machine case Jewellery manufacturing units in India” – B E Narkhede and DrS S Mantha – National Conference on Business Optimization Research Wave2007organized by NITIE, Mumbai and IIT Bombay, from 15 – 17 February 2007

“Uncertainty in Measurement – A review”, K N Vijay Kumar, DrS S Mantha, Journal of the Indian Institution of Industrial Engineering, (IIIE/IEJ-1405/NHQ/2007)

“Textiles for Composites”, DrS S Mantha and Shashikant Borkar, Journal of Textile Excellence, Vol 4, Issue 21, Page 8, 2007

“Surveys carried out in Indian enterprises to identify the best supply chain management practices”, SRam Reddy, DrSSMantha and DrG.TThampi, International Conference on advances in manufacturing and Technology management (ICAMTM – 2007), 18th to 20th Jan 2007, organized by, PCE, Thane (W), Maharashtra, India, in association with University of Mumbai

“Effect of silica and calcium carbonate fillers on the properties of woven glass fibre composites” – S P Borkar, DrS S Mantha, Indian Journal of fibre and Textile Research, (IJFTR), Vol32(2), June 2007, pp251-253, 

“Application of Taguchi methods for studying hole roundness error in BTA machining”, Keshav Jatakar, DrS S Mantha, Journal of the Indian Institution of Industrial Engineering, Vol, XXXVI No08 August 2007

“Modelling Evaluation of Effectiveness of Collboration by Using O – MAX”, DrSS Mantha and S B Rane, the Fourth AIMS International Conference on Management, (A506) December 28th to 31st, 2006, Indian Institute of Management Indore

“Modelling Evaluation of Effectiveness of TPM Using O-MAX: A Case Study in Amusement Park Organisation”, DrS S Mantha and SB Rane, Paper accepted in the Fourth AIMS International Conference on Management, (A505) December 28th- 31st, 2006, Indian Institute of Management Indore

“Effect of Enterprise Information Portal on Dimensions of Procurement Cycle: A Case Study of IT Implementation in Construction Industry”, DrS S Mantha, and SB Rane, Fourth AIMS International Conference on Management, (A503), December 28thto 31st, 2006, Indian Institute of Management Indore

“Studies on “Factors responsible for quality enhancement of precious metal alloys Jewellery and productivity improvement of machine cast jewelry manufacturing units”, DrS S Mantha and B E Narkhede, 10th Annual Conference of Society of Operations Management, IIM Ahmedabad, December 21st – 23rd, 2006

“Application of MOST in the field of Human Resource Management”, Sanjay Kumar, DrS.SMantha, Arun kumar, IIE, Annual Conference and Exposition, May 20th-24th 2006, Orlando, Florida, Session: 1048 of IERC27 Engineering Management

“Optimum Utilization of Manpower Using Maynard Operation Sequence Technique (MOST) – a case study”, Sanjay Kumar, DrS S Mantha, Journal of the Indian Institution of Industrial Engineering, (AR/NO/1326/06)

“Six Sigma and Statistical Methods in R&D and Manufacturing”, K N Vijay Kumar, DrS S Mantha, DrArun Kumar, 48th National Convention of IIIE, Bangalore, September 2006

“Role of Product development in optimizing SCM dimensions”, 3rdInternational Conference on Logistics and Supply Chain Management (ILSCM 2006), Rane S.B., DrS.SMantha, AVBhonsale, VSTirodkar, PSG College of Technology, Coimbatore, August 2nd – 4th 2006

“Application of Cellular Manufacturing in Optimising Batch quantity in Multi Product environment”, Sanjay Kumar, DrS S Mantha, Journal of the Indian Institution of Industrial Engineering, (AR/NO/1318/2006)

“Optimization of Human Resource Through Job Rotation at Work Place”, Sanjay Kumar, DrS S Mantha, Journal of the Indian Institution of Industrial Engineering, VolXXXV No11 November 2006, p33 – p36

“Towards building a scalable e-commerce architecture”, DrS S Mantha, S Ram Reddy, P S Lokhande, Two-day National Conference on Trends in Telecom Transmission: Copper to Fiber, KJCOE and IEEE – Bombay, March 17th – 18th, 2006

“Composites for Passenger cars”, S P Borkar, DrS SMantha, Paper published in the Asian Textile Journal, Vol 15, Issue 3, p42- p52 – ISSN 0971 3425, March 2006

“Impact of Downsizing and Restructuring in Industrial Management”, DrS S Mantha and Shailaja S Mantha, The 10thWorld Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2006, Jointly with The 12th International Conference on Information Systems Analysis and Synthesis: ISAS 2006, July 16th – 19th, 2006 – Orlando, Florida, USA

“Natural Fibre Composites for Automobiles”, Shashikant Borkar, DrS S Mantha, H V S Murthy, 61st All India Textile Conference, DrVasanrao Deshpande Hall, Civil Lines Nagpur, Hosted by Textile Association of India, January 7th – 8th2006

“Effective Strategies of Product Development Phase for Product Cannibalization in Product Life Cycle Management”, MrRPTerkar, DrSSMantha, and MrAKSen, National Conference on Design for Product Life Cycle, February 17th – 18th, 2006, BITS, Pilani

“Applications of Maynard Operation Sequence Technique (MOST) in the field of Human Resources Management” – Sanjay Kumar, DrSSMantha, – 2006 Institute of Industrial Engineers (IIE), Annual Conference and Exposition, May 20th– 24th, 2006, – The Renaissance Orlando Resort at Sea World, Orlando, Fla.

“An empirical investigation of the impact of concurrent engineering for integrated product development and competitive capabilities” – BENarkhede and DrSSMantha, Kongu Engineering College, Perundurai, Erode, International Conference on “Resource Utilisation and Intelligent systems” – INCRUIS Jan 04 – Jan 06th, 2006

“BTA Machining”, Keshav Jatakar, DrS.SMantha & DrArun Kumar, National Conference, Shri Vithal Education and Research Institute’s College of Engineering, Pandharpur, 23rd and 24th December 2005

“Combined Robust Design and Dual Response Method for Optimization of Surface Roughness”, DrSSMantha, Ashish Prabhu, Santosh Rane, International Conference on Productivity and Quality Research 2005, December 12th– 15th, 2005 organised by Indian Institute of Technology, Delhi and International Society for Productivity and Quality Research, Miami USA

“Modelling Evaluation of Buyer-Supplier Relationship and Quality Index by Using O-Max: A Case Study”, Rane S.B., DrS.SMantha, Mahesh Parab, International Conference on Productivity and Quality Research 2005, December 12th– 15th, 2005 organised by Indian Institute of Technology, Delhi and International Society for Productivity and Quality Research, Miami USA

“Modelling Responsiveness Evaluation of Supply Chain By Using O-Max: A Case Study”, Rane SB., DrSSMantha, Shrujal SNarvekar International Conference on Productivity and Quality Research 2005, December 12th–15th, 2005 organised by Indian Institute of Technology, Delhi and International Society for Productivity and Quality Research, Miami USA

“Effect of Product Development on SCM dimensions: Case Studies”, Rane S B, DrS S Mantha, S M Khamkar International Conference on Productivity and Quality Research 2005, December 12th – 15th, 2005 Organised by Indian Institute of Technology, Delhi and International Society for Productivity and Quality Research, Miami USA

“Technology fusion and cross R&D through linkages between academics and industry: Some strategic decisions”, B E Narkhede, DrS S Mantha, Journal of the Indian Institution of Industrial Engineering, pp 60-67, (AR/NO/1280/2005)

“Optimising financial performance by accounting and practices of human resource management in IT Industry.” – Sanjay Kumar, DrS S Mantha, – Indian Institute of Industrial Engineering, Pune Chapter, XXXXVII National Convention, Nov 11th – 13th, 2005 Le-Meridian, Pune

“Role of e-Age Industrial Engineering in the Business Process Redesign for Quality enhancement and Productivity improvement: A Case Study.” – B E Narkhede, DrS S Mantha, – Indian Institute of Industrial Engineering, Pune Chapter, XXXXVII National Convention, Nov 11th – 13th, 2005 Le-Meridian, Pune

“World class Supply Chain Management (SCM)”, – S Ram Reddy, DrS S Mantha, – The IX Annual Conference of the Society of Operations Management- December 16thand 18th, 2005 at the School of Management, Pondicherry University, Pondicherry

“Modelling Performance Evaluation of Supply Chain in Technological Institution using CII-EXIM Bank Award for Business Excellence”, SBRane, DrS S Mantha, DrA.VBhonsale, (2005), The International Conference on Services Management organized by Institute for International management and Technology Oxford Brooks University at IIMT Gurgaon India on March 11th – 12th, 2005

“CFD as a CAE tool for simulations, analysis and design optimization in Automotive applications” Yakkundi Vivek, DrS S Mantha, National Conference on Sun rising Technologies, NCSRT-05, November 18th and 19th 2005

“Optimising batch quantity in a multi-product environment using Group Technology” – Sanjay Kumar, DrSSMantha, DrArun Kumar, National Conference on Sun rising Technologies, NCSRT-05, Parshwanath COE, November 18th and 19th 2005

“Modelling Evaluation of Safety index by using O-MAX: A Case study” – Rane S B, DrS S Mantha, International Conference on reliability safety and Hazards December 2005 at BARC, Anushaktinagar, Mumbai

“Modelling performance evaluation of Technological Institutions” by using OMAX tool” – Rane S.B, DrS.SMantha, 11th International conference on Productivity and quality research, – Organised by Indian Institute of Technology, Delhi and International Society for Productivity and Quality Research, Miami U.S.ADecember 12th – 15th, 2005

“Optimisation of human resource through Job rotation and learning at work place”, Sanjay Kumar, DrS.SMantha, DrArun Kumar Journal of Industrial engineering, organized by Indian Institution of Industrial Engineering, 2005, Powai, Mumbai

“MATLAB Based Modelling of CNG / LPG Engine” – DrS S Mantha, Amar Pathak, 5th WSEAS IntConfon Simulation, Modelling, and Optimisation (SMO ’05), Corfu Island, Greece, August 17th – 19th, 2005

“Wireless control of water filling in overhead tanks” – DrS S Mantha, DrS K Mahajan, – WSEAS International Conference on Systems engineering, July 11th – 13th, 2005, Greece

“Parametric Analyses of Shell Nozzle junction – A Finite Element Analyses and Artificial Neural Network Approach.” DrS S Mantha, V Kumar Mali, – CFD 2005 Fourth International Conference on Computational Fluid Dynamics in the Minerals and Process Industries, 6th to 8th June 2005, Trondheim, Norway, 

“Modelling Supply Chain Management for Collaborative Product Development” – MrS B Rane, DrSSMantha, International Conference on Management Principles, Policies, Processes &Practices in the XXI Century held at Janson’s School of Business Coimbatore on 20th May & 21st May to 2005

“A Strategic tool for Total Productivity and Quality Management (TPQM) and its relevance with Jewelry Manufacturing” B E Narkhede and DrS S Mantha – National Conference on “Management of emerging Sectors – New paradigm and perspectives”, 15th and 16th April 2005, BIET (MBA Program), Davanagere (Karnataka)

“Modelling Performance Evaluation of Supply Chain in Technological Institution Using CII-Exam Bank Award for Business Excellence” DrS S Mantha, MrSBRane, DrBhonsale and MrBaviskar – International Conference on Services Management by Institute for International Management and Technology, Journal of Services Research, Academic Partner; sponsors, Radisson, on March 11th – 12th, 2005 at Radisson Hotel, Delhi

“Knowledge Management – A Key for Quality enhancement and Productivity improvement of jewelry Industry”, B E Narkhede, DrS S Mantha, Vijay Gopani – National Conference on “Innovated TQM” at PSG college of Engineering, Coimbatore Feb 25th- 26th, 2005

“Influence of casing geometry and axial inlet clearance on the pre-rotational head of a Centrifugal Pump”, Nambiar P, DrS S Mantha – International Turbo-machinery conference organized by Texas A & M University, held in Dubai in May 2005

“Responsiveness evaluation of new Product development process by using O-Max tool – International Conference on emerging Technologies in Intelligent systems and Control” organized by Kumaraguru College of Technology, Coimbatore, National University of Singapore, Oakland University USA, 5th to 7th January 2005, DrS S Mantha, S B Rane, DrA V Bhonsale, R D Zanzane

“Implementation of Group Layout and capacity planning in a Jewellery Industry – A case Study”, – Indian Institute of Industrial Engineering Journal – VolXXXIV No.2, February 2005, pp 19-25, – B E Narkhede, DrS S Mantha, A R Shinde

“Bio Gas as an alternative fuel for IC Engines”, National conference on Recent Trends in mechanical Engineering, (Yantra 2006), College of EngineeringPandharpur, 23 – 24 Dec2005, S D Yadav, DrS S Mantha

“Jewellery Manufacturing in India: A comprehensive review”, B E Narkhede and DrS S Mantha, Indian Institute for Industrial Engineering Journal, VolXXXIV No.10, October 2005, pp 34-37

“Experimental investigations on the influence of casing design on centrifugal pump performance”, P Nambiar, DrS S Mantha, DrS S Murthy, – 31st National Conference of Fluid Mechanics and Fluid Power in Jadhavpur University, India- December 16th – 18th 2004, NC FMFP 2004.

“Managing markets and cultures: a conceptual paradigm for the content and context in the realm of knowledge management practices”- G T Thampi, DrS S Mantha – Society of Operations Management in association with National Institute of Industrial Engineering (NITIE), Mumbai, India and College of Administrative Science, University of Alabama in Huntsville, USA – VIII Annual International Conference December 17th – 20th, 2004

“Studies on Factors Responsible for Quality Enhancement of Precious Metal Alloys Jewellery and Productivity Improvement of Machine Cast Jewellery Manufacturing Units”, Narkhede BEand Dr Mantha SS(2005), Proceedings of the 8th Annual International Conference of The Society of Operations Management organized by NITIE, Mumbai & University of Alabama in Huntsville, USA (December 17th to 20th, 2004, TMGH Publishing Company Limited, New Delhi, pp 362-378

“Role Of Ishikawa Diagram In Demonstration Of Poor Customer Satisfaction Level In the Service Supply Chain: A Case Study”, DrS S Mantha, SBRane, Sameer Chavan, – VIII Annual International Conference Organized by Society of Operations Management in association with National Institute of Industrial Engineering (NITIE), Mumbai, India and College of Administrative Science, University of Alabama in Huntsville, USA, December 17th – 20th, 2004

“Exploring the Potential of Industry-Institute Interaction in Indian Jewellery Industries”, B.ENarkhede, DrS.SMantha, Vijay Gopani – The Indian Journal of Technical Education, ISTE, Volume 27, No.3, July-September 2004, page 90

“Monitoring Work in process (WIP) through Information flow in inbound supply chain”, DrS S Mantha, Golghate C D, Reddy S Ram, – Society of Operations Management in association with National Institute of Industrial Engineering (NITIE), Mumbai, India & College of Administrative Science, University of Alabama in Huntsville, USA – VIII Annual International Conference December 17th – 20th, 2004

“Evaluation of responsiveness of Manufacturing systems by O-Max tool”, International Conference on emerging Technologies in intelligent systems and Control”, organized by Kumaraguru College of Technology, Coimbatore, National University of Singapore, Oakland University, USA, 5th to 7th January 2004, DrS S Mantha, S B Rane, DrA V Bhonsale

“ERP Implementation by using balanced Scorecard: A case Study”, International Conference on emerging Technologies in intelligent systems and Control”, organized by Kumaraguru College of Technology, Coimbatore, National University of Singapore, Oakland University, USA, 5th to 7th January 2004, S B Rane, DrS S Mantha, DrA V Bhonsale.

“Evaluation of responsiveness of services in Supply Chain by using O – Max tool, A case Study”, International Conference on emerging Technologies in intelligent systems and Control”, organized by Kumaraguru College of Technology, Coimbatore, National University of Singapore, Oakland University, USA, 5th to 7th January 2004, S B Rane, DrS S Mantha, DrA V Bhonsale, S G Aravandekar

“Strategy for Cycle Time reduction in Technological Educational System by introducing flexibility”, The International Conference on Science Technology and Mathematics Education held at Goa – Organised by the Homi Bhaba Centre for Science and Education, a national centre of the TIFR, Mumbai, India, December 13th to 17th 2004, DrS S Mantha, S B Rane, Dr, A V Bhonsale, DrP V Natu

“Strategy for exercising Best practices in Technological Institutions by evaluation of Supply Chain using Singapore Quality award”, National Conference on emerging trends in Mechanical Engineering” 10th to 12th September 2004, organized by FrAgnel Ashram and Technical Education complex, Goa, Padre Conceicao College of Engineering, Verna, Goa, S B Rane, DrS S Mantha, Dr, A V Bhonsale, DrS K Mahajan.

“Process model for successful ERP implementation in modern Business Organisation”, National Conference on emerging trends in Mechanical Engineering” 10th to 12th September 2004, organized by FrAgnel Ashram and technical Education complex, Goa, Padre Conceicao College of Engineering, Verna, Goa, DrS S Mantha, S B Rane, Dr, A V Bhonsale, C M Veer, Suraj Rane

“Benchmarking Process Model with performance indicators of Supply Chain to lead to world class technological Institution”, National Conference on emerging trends in Mechanical Engineering”, 10th to 12th September 2004, organized by FrAgnel Ashram and technical Education complex, Goa, Padre Conceicao College of Engineering, Verna, Goa, S B Rane, DrS S Mantha, Dr, A V Bhonsale

“Evaluation of ERP Implementation by using O – Max tool” – A case study, International Mechanical Engineering Conference 2004 (IMEC 2004) 5th to 8th December 2004, at Kuwait, S B Rane, DrS S Mantha, Dr, A V Bhonsale

“Analysis of various factors which govern Customer satisfaction level of the Indian suburban Local train services in Mumbai by using Ishikawa diagram”, DrS S Mantha, Rane S B, Dr, A V Bhonsale, The International Conference on Manufacturing and Management – 2004, (GCMM-2004) December – 6th to 10th 2004 organised by Queensland University of technology, Australia, IIT Delhi, and Vellore Institute of Technology, Vellore – 632014, Tamil Nadu, India

“Architectural framework for curriculum design and course work to integrate inter disciplinary and enabling technologies to accentuate excellence in Engineering education and Nation building” – G T Thampi, DrS S Mantha, International Mechanical Engineering Conference 2004, IMEC 2004 held in Kuwait December 5th to 8th 2004

“Micro Controller based Decelerometer”, ProcOf National Conference on ‘Recent Trends in CAD/CAM/CAE’ (NCRTC-2004), 21-23 June 2004, R.I.T., Sakharale(p.p5.34 – 5.39) S D Yadav, DrS S Mantha and R T Patil

“Design and Development of Decelerometer”, Procof National Seminar on ‘Advances in Mechanical Engineering’ (AIME-04), orgasized by J.D.I.E.T., Yavatmal, 23 – 25 April, 2004, S D Yadav and DrS S Mantha

“Evaluation of Total Productive Maintenance Implementation Using O-Max Tool”, DrSS Mantha, ProfSBRane , DrA.VBhonsale, Deepak S Dalvi (2004), – pp.43.,The International Conference on Manufacturing and Management 2004 (GCMM-2004) December 6th-10th, 2004 organised by Queensland University of Technology, Australia &Vellore Institute of Technology Vellore Tamil Nadu, India, (ISBN10: 817319677X, ISBN13: 9788173196775)

“Effective JIT Implementation Using 5’S Philosophy”- pp260, The International Conference On Manufacturing And Management-2004 (GCMM-2004) December 6th-10th, 2004 organised by Queensland University of Technology, Australia &Vellore Institute of Technology Vellore Tamil Nadu, India, 

“Strategy to lead to World class Technological Institution by performance assessment of Supply Chain using CII-EXIM Bank award model for Business Excellence”, DrS S Mantha, Rane S B, DrA V Bhonsale, The International Conference on Manufacturing and Management 2004 (GCMM-2004), Vellore Institute of Technology, Vellore – 632014, Tamil Nadu, India

“Achieving competitive advantage to lead to World class Business Process by using e-enabled Supply Chain Management”, Rane S B, DrS S Mantha, DrA V Bhonsale, National Conference on Challenges in achieving Global Quality CAGQ-2004 from May 24th to 25th 2004 at Thiagarajar College of Engineering, Madurai

“Performance evaluation of Supply Chain by using Rajiv Gandhi National Quality award model to lead to World class Technological Institution”, DrS S Mantha, S B Rane, DrA V Bhonsale, 9th International Symposium on Logistics(9th ISL) at IIM Bangalore, in collaboration with Nottingham University business school, UK, from 11th to 14th July 2004.

“Quality policy formulation process model to lead to World class Business process”, International conference on logistics and supply chain (IL-SCM) at Mechanical engineering Department, PSG college of Technology, Coimbatore in Aug 3rd to 5th, 2004 in collaboration with the centre for SCM Michigan University, USA, DrS S Mantha, Rane S B, DrA V Bhonsale

“Building competency to lead to World class business Process in the realm of integration of Supply chain management and customer relationship management using benchmarking techniques”, DrS S Mantha, S B Rane, DrA V Bhonsale, International conference on responsive supply chain and Organisational Competitiveness at Coimbatore Institute of Technology, Coimbatore on Jan 5th to 7th 2004, in collaboration with Massachusetts University, USA

“Supply Chain Management Modelling an Object Oriented Analysis paradigm”, – DrS S Mantha, G T Thampi, S Ramreddy, at the National conference on emerging trends in Engineering Technology and Management by Adhiyamaan Engineering College, Dharmapuri, Tamilnadu, Sept8th – 9th, 2003

“Electroplating in Jewellery Industry – A critical review”, International conference on advanced Manufacturing Technology, VJTI, Mumbai 29th – 31st January 2003 – B E Narkhede, DrS S Mantha, P V Khachane

“Implementation and Comparison of different Algorithms in Path-Planning”, DrSSMantha, Rupak Venugopal, Deep Kolhatkar, 2002 WSEAS IntConfon Electronics, Control& Signal Processing, 2002 WSEAS International Conference on e-activities (E-Learning, E-Communities, E-Commerce, E-Management, E-Marketing, E-Governance & Tele-Working), (451-106), 

“Exploring the potential of Rapid Prototyping in Jewellery Industry”, Proceedings of the International Conference on e-Manufacturing held at Maulana Azad National Institute of Technology, Bhopal, November 17-19, 2002, IIIE, pp 278-286, B E Narkhede, S S Mantha

“Redefining the role of Industrial Engineers by initiating them to Enabling Technologies”, G T Thampi, S S Mantha, Proceedings of the National seminar on Interactive Integrated Technological advancement- recent trends at College of Engineering Trivandrum, on July 5th and 6th 2002

“Optimising Image Feature Extraction Process using Genetic algorithms”, SSMantha, WSEAS Multi-conference, Skiathos Island, Greece, http://www.wseas.org/conferences/2002/skiathos composed by four joint conferences: ICOSMO, ICOSSIP, ICOMIV and ICRODIC,2002 held in Skiathos Island, Greece from September 25thto Sept28th, 2002, pp (447-136)
12th Feb 2018, Elsevier Publication

“Conceptualizing and creation of decision support system to design customized course curriculum for catering to the individual needs in the realm of Web enabled Education, an object oriented programming paradigm in C++” – SSMantha & GThampi, 15th International Conference on Computer Communication, “Redefining Internet in the context of Pervasive Computing”, August 12-14, 2002, Mumbai, Maharashtra, India, VOL 15; PART 1, pages 279-289

“Customer Relationship Management paradigm applied to the management of Intellectual Capital in an Educational Institution using Data Mining and fuzzy logic techniques”, at the 3rd International Conference on Information Communication Technologies in Education, Samos island, Greece, 17 – 19 July, 2002, – SSMantha & GThampi, 

“Developing a procedural template for practicing business process re-engineering to create architectures for web-based education in Bricks – and – Mortar Institutions.” ED-MEDIA 2002 – World Conference on Educational Multimedia, Hypermedia & Telecommunications, held in Denver, Colorado, USA, June 24-29, 2002 – SSMantha & GThampi, 

“Creation of a new paradigm for the roll of educators through in service training that facilitates innovation and improves the process of imperfectly seeking emerging technology in tandem with the evolving market place”- SITE 2001 – Society for Information Technology and Teacher Education – International Conference (Orlando, Florida; March 5-10 2001) G Thampi & SSMantha, 2001(1), 3153-3155, Volume 2001, Issue 1, 2001

“Critical study of web enabled Education in the realm of distance learning” – International conference on “Technology in teaching and learning in higher education” Aug: 25-27 2000, Samos island, Greece, G Thampi & SS Mantha, ICCC ’02 Proceedings of the 15th international conference on Computer communication Pages 279-289 International Council for Computer Communication Washington, DC, USA ©2002, ISBN:1-891365-08-8

“Commercial plant for producing paper grade pulp by a novel anaerobic process” – 1999 – H U Gangar, SSMantha, A J Shaikh, and R H BalasubramanyaJournal of Indian Pulp & Paper Technical Association, (IPPTA), India, Vol12, No3, p43-48, Jul.-Sept2000

“Improving Technical Education – a practical approach” S S Mantha, September 1999, National Board of Accreditation, All India Council for Technical Education (AICTE), New Delhi

“Commercial plants for Biogas production from Textile mill waste” – 1998 – H U Gangar, SSMantha, and R H Balasubramanya, Textile Trade and Industry Journal, Vo1.37, No.11-12, p.64, Nov.- Dec., 1999

“Parametric Design using concurrent Engineering Tools”, National Conference on Recent advances in Mechanical Engineering, S S Mantha, Kurukshetra University, March 1997

“Concurrent Engineering approach for Design and Modelling of Helicopter Components”, – DrS S Mantha, I-DEAS user conference, Bangalore, November 1996

“Parametric Design and Modelling of Tractor Transmission Casing”, DrS S Mantha, I-DEAS user conference, Bangalore, November 1995

“Design of steerable 5-axis Robot and PC Interface”, Symposium on Robotics and remote handling, SSMantha, B.A.R.CMumbai, (This Robot was exhibited at Nehru Science Centre, Worli, Bombay)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Visited 85 times, 1 visits today)